Receiver Solomend HD PVR
HARGA : Rp. 1.000.000 Specifications:
1) 300 MHz MIPS Processor - Linux Operating System
2) Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1
3) Fully compliant MPEG-2 MP@HL & MP@ML;
4) Fully compliant MPEG-1 Layer I & II & III, Dolby Digital Audio(AC3);
5) SCPC & MCPC receivable from C/Ku band satellites;
6) multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/1.3(USALS) supported)
7) NIT search supported;
8) Support MHEG-5;
9) Support HDMI 1.3;
10) Support PVR(store in USB disk);
11) Multimedia files playback(by USB);
12) Support Electronic Program Guide(EPG) for 7 days;
13) Teletext and subtitle out through OSD;
14) Support multi-lingual DVB subtitle and teletext;
15) Automatic and manual channel scan options;
16) automatic service scan
17) channel-change time <>MORE SPECIFICATIONS ABOUT SOLOMEND HD PVR 800 RECEIVER DVB-S2
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz Input Level:-65~-25dBm
Input Impedance:75¦¸
LNB Power: Auto/14v/18v/OFF, Imax = 500mA Video decoder Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device Audio decoder Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main/sub),
Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output digital Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical, Toslink Video parameter Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart
Output: FBAS, RGB, S-Video Serielle Interface RS 232 Typ RS232 bidirectional Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware Ethernet 10/100 MBit compatible
interface Function: Update of Firmware USB 1 x USB 2.0 Host ,PVR LNB power and polarisation per tuner LNB Current 500mA max.; short-circuit-protected LNB Voltage vertical <> 11,5V at 400mA
LNB Voltage horizontal <> 17,3V at 400mA
Count of active satellite position
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
External PSU
Input:110-240V AC / 50-60Hz / 0,6A
Output: 12V = / 3,0A
Physical specification
Ambient Temperature +15 °C...+35 °C
Humidity < 80%
Size (W x D x H): 300 mm x 220 mm x 56 mm
Weight: 1,8 kg without HDD
Power
AC input range:100-240VAC 50/60Hz
Power Consumption (Standby): Max. 10W (<1 W)
