BROADBAND AMPLIFIER BOSTER
Harga : 1.000.000Specifications
2.4G indoor signal booster 1000mw
2.4G indoor signal booster 2000mw
an indoor solution 1W bi-directional Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance.
The unit is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 802.11b/g devices.
The amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increases the receive sensitivity of wireless LAN Access Point. Full output power of 1W is achieved with only 5 mW input into the Booster.
Character:
Cast Aluminum Construction
Power and transmit LEDs
15dB transmit gain (adjustable)
Lightning Protection
High Gain, High Value, High Performance
Increase range of low powered radio modems
Antenna Specifications:
5dBi Antenna w/SMA Female Connector
145% Performance
150% Distance
Antenna length: 191mm
Connector: SMA Female
Specification
Operating Range 2400 - 2500 MHz
Output Power: 1W/30dBm nominal for 802.11g/54Mbps
Transmit Gain: 15dB (Adjustable)
Operating Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing
Frequency Response: *+- 1dB over operation range
Transmit Input Power: Max. 100mW, Min 6mW
Receiver Gain: 15dB typical Receive Noise Figure: 3.5dB typical
Connector: SMA receptacle (50 ohm)
Power: 6V DV Max. current <1A, 90-264V for AC adapter
Operating Temp.:*-20 to + 70C
Operating Humidity: Up to 95% relative humidity
Distance*: Up to 1500M (5000ft) depends on environment
Dimension (cm): 7.8 cm (L) x 5.6 cm (W) x 2.9 cm (H)
Material: Die Casting Aluminum
